If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the "Empty the Recycle Bin" function on the PC
to permanently delete the file.
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
Supports the View Devices and Home in Media Play homepage.
You can ascertain the selected
file name and the number of files
Sort List Section:
Displays sorting standard.
Sorting standard is
different depending on the
Red (Change Device): Selects a connected device.
Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
Using the � (REW) or µ (FF) button, file list can move to next or previous page.
Sorting T Tools
File List Section:
You can confirm the files
and groups that is sorted by