■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode
When you set to Dual f-g, the current sound
mode is displayed on the screen.
If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to TV.
Dual f Dual g
Mono Dual f
Setting the Time
■ Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
Available only when Clock Mode is set to
Time Zone (depending on the country): Select your time
When Country is set to Others, you can use this
This function is only available when the
Clock Mode is set to Auto.
Using the Sleep Timer
■ Sleep Timer
TV after a preset period of time. (Off, 30, 60, 90, 120,
150 and 180 minutes).
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
: Automatically shuts down the
L Move U Adjust E Enter R Return