Connection Settings - Brother MFC-T800W Basic User's Manual

Chapter 7
1 TAD
When the TAD answers a call, the LCD
shows Telephone.
IMPORTANT
DO NOT connect a TAD elsewhere on the
same telephone line.
36
1
LINE
1
EXT.

Connection settings

The external TAD must be connected as
shown in the previous illustration.
a
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
b
Carefully guide the telephone line cord
into the cable channel and out the back
of the machine.
c
Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
d
Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
e
Record the outgoing message on your
external TAD.
f
Set the TAD to answer calls.
g
Set the Receive Mode to
External TAD. (See Receive Modes
on page 26.)
7