Using The Flash - Canon mvx1sI Instruction Manual

Using the Flash

You can use the built-in flash for recording still images in dark places. The flash is
equipped with the red-eye reduction mode.
(auto)
(red-eye reduction, auto)
(flash on)
(flash off)
Assist lamp
Available only in the
1. Press the
• Set the camcorder to a recording program other than the Fireworks mode (SCN).
• The setting changes with each press of the button.
• The symbol of the selected flash mode appears on the screen. "
4 seconds.
2. Press the PHOTO button halfway.
In the
image recording is set to anything other than [
3. Press the PHOTO button fully.
The flash fires.
Do not fire the flash close to people's eyes.
Do not fire the flash at persons while they are driving.
Do not fire the flash with the flash bulb covered with your hand.
The practical range of the flash is approx. 1 to 2 m. The range depends upon
the recording condition.
The range of the flash decreases in continuous shooting mode.
For the red-eye reduction mode to be effective, the subject needs to look at the
assist lamp. The degree of reduction depends upon the distance and on each
individual.
Downloaded From VideoCamera-Manual.com Manuals
The flash fires automatically according to the brightness
of the subject.
The flash fires automatically according to the brightness
of the subject.The assist lamp lights up to reduce the
red-eye effect.
The flash always fires.
The flash does not fire. Use this setting in places where
flash photography is prohibited.
PHOTO button
Flash
(flash) button.
mode, the flash can be used in record pause mode when still
and modes.
STILL I. REC OFF].
(flash) button
" disappears after
81
E