Installation; Installation Procedure; Supplied Accessories - Sony PDW-HD1500 Installation Manual

1-1. Installation Procedure

Installation procedure of this unit is shown on the following flowchart.
Refer to each section about detail of each flow.
The operation manual is also reqruired to do *-marked flow.
Start
Determination of
1-3. Operating Conditions
installation place
1-4. Power Supply
Unpacking
n
When the unit is transported, it is required to pack the unit into the specified new packing materials.
Do not reuse the packing materials.

Installation

1-5. Installation Space
*Connection
1-6. Connectors / Cables
1-7. Signal Inputs and Outputs
*Initial setup 1-8. Settings after Installation
*Operation check
End

1-2. Supplied Accessories

Cap, BNC ........................................................................ 12
Cap, DC OUT .................................................................... 1
Cap, XLR (F) ..................................................................... 2
Cap, XLR (M) ................................................................... 4
Cap, DUST ........................................................................ 2
Operation manual (Japanese) ............................................ 1
Operation manual (English) .............................................. 1
Installation manual ............................................................ 1
CD-ROM (Operation manual) ........................................... 1
CD-ROM (XDCAM APPLICATION SOFTWARE) ....... 1
n
After installation, be sure to use the supplied cap for protecting unused connector.
PDW-HD1500 IM
Section 1
Installation
1-1 (E)