Download Print this page

Technical Data; Safety Instructions - Black & Decker pw1300c User Manual

1300w
Hide thumbs

Advertisement

6
English
PW1300C
1300W High Pressure Washer
1

TECHNICAL DATA

Technical Data (EN)
Output
Pressure
Maximum pressure
Power
T° input
Maximum input pressure
Repulsive force of the gun to the maximum pressure
Motor Insulation
Motor Protection
Voltage
Sound level:
L
(EN 60704-1)
PA
L
(EN 60704-1)
WA
Unit vibrations
Weight
2

SAFETY INSTRUCTIONS

When using power tools, always observe the safety regulations
applicable in your country to reduce the risk of re, electric shock,
personal injury and material damage. Read the following safety
instructions before attempting to operate this product. Keep these
instructions in a safe place!
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Denotes risk of electric shock.
Fire hazard
2.1
Work Area
2.1.1
Keep work area clean and bright. Cluttered areas and benches
can cause accidents. Keep work area well lit (250-300 Lux).
2.1.2
Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust. Power tools
create sparks that may ignite the dust or fumes.
2.1.3
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2.2
Electrical Safety
2.2.1
Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodi ed plugs and matching outlets
will reduce risk of electric shock.
2.2.2
Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
2.2.3
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
2.2.4
Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
2.2.5
When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
2.3
Personal Safety
2.3.1
Stay alert. Watch what you are doing. Use common sense. Do
not operate the tool when you are tired or under the in uence
of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
2.3.2
Use safety equipment. Always wear eye protection. Everyday
eyeglasses only have impact resistant lenses, they are not safety
glasses. Contain long hair. Safety equipment such as dust mask,
non-skid safety shoes, hardhat, heat-resistant apron or hearing
protection used for appropriate conditions will reduce personal
injuries.
Unit
PW1300
2.3.3
Avoid accidental starting. Ensure the switch is in the o
position before plugging in. Carrying power tools with your
L/min
6
nger on the switch or plugging in power tools that have the switch
on invites accidents.
MPa
6,5
2.3.4
Remove any adjusting key or wrench before turning the power
MPa
11
tool on. A wrench or a key left attach to a rotating part of the power
kW
1,3
tool may result in personal injury.
2.3.5
Do not overreach. Keep proper footing and balance at all times.
°C
50
This enables better control of the power tool in unexpected
MPa
1
situations.
2.3.6
Dress property. Do not wear loose clothing or jewelery. Keep
N
9,1
your hair, clothing and gloves away from moving parts. Loose
-
Class F
clothes, jeweler or long hair can be caught in moving parts.
-
IPX5
2.3.7
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
V/Hz
230/50
properly used. Use of these devices can reduce dust related
hazards.
2.3.8
Secure workplace. Use clamps or a vice to hold the workpiece. It is
Db (A)
78,2
safer and it frees both hands to operate the tool.
Db (A)
86
2.4
Power tool use and care
M/s
3,72
2
2.4.1
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer
kg
6
at the rate for which it was designed.
2.4.2
Do not use the power tool if the switch does not turn it on and
o . Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
2.4.3
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
2.4.4
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
2.4.5
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may a ect the power tools operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
2.4.6
Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
2.4.7
Use the power tool, accessories and tool bits etc., in accordance
with these instructions and in the manner intended for the
particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool
for operations di erent from those intended could result in a
hazardous situation.
2.5
Battery tool use and care
2.5.1
Ensure the switch is in the o position before inserting battery
pack. Inserting the battery pack into power tools that have the
switch on invites accidents.
2.5.2
Recharge only with the charger speci ed by the manufacturer.
A charger that is suitable for one type of battery pack may create a
risk of re when used with another battery pack.
2.5.3
Use power tools only with speci cally designated battery
packs. Use of any other battery packs may create a risk of injury and
re.
2.5.4
When battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together ma cause burns
or a re.
2.5.5
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.

Hide quick links:

Advertisement

loading