Configuring The Router; Internet-Access Settings - Billion 7401VGP Quick Reference Manual

TIPS:
•
The Micro Filter removes voice-line noise from the ADSL portion of your line --
without it, your voice calls can degrade the quality of your Internet connection.
•
Make sure the Micro Filter's pigtail is inserted into the wall socket.
•
If you don't have two wall sockets, use a normal phone-line splitter (Y-Splitter).

Configuring the Router

To start the process of configuring your router, open your Web browser. In the
address bar, type in 192.168.1.254. This is the address that you need to use in order
to access a Billion 7401VGP router.
Next, a pop-up window will prompt you for a username and password. This is the
username and password for your router, not your MWEB ADSL connection. The
router's default username is admin and the password is admin.
TIP: for security reasons, please change these login details and keep them in a safe place.
Once you have connected to the router, select Quick Start from the options on the
left.

Internet-access Settings

With the router's Web-administration page open in front of you, you can now set up
the router for ADSL Internet access.
Connection
At the top of the page, under the "Connection" section, make sure that the selected
values are as follows:
Encapsulation
VPI
VCI
NAT
Optional Settings
In the "Optional Settings" section, leave everything blank.
DNS
In the "DNS" section, tick the "Enable" option, and leave everything else blank.
PPP
In the "PPP" section, fill in your MWEB ADSL username and password.
Click the Apply button when you are finished.
v.002
B i l l i o n 7 4 0 1 V G P M a n u a l S e t u p
- PPPoE
- 8
- 35
- Enable
MWEB -- 06 July 2007 Page 4