RM-484; RM-485; RM-486
System Module and User Interface
Figure 67 USB charger interface block diagram
SIM interface
The device has one SIM (Subscriber Identification Module) interface. It is only accessible if battery is removed.
The SIM interface consists of an internal interface between RAPIDO and EM ASIC (N2200), and of an external
interface between N2200 and SIM contacts.
The SIM IF is shown in the following figure:
Figure 68 SIM interface
The EM ASIC handles the detection of the SIM card. The detection method is based in the BSI line. Because of
the location of the SIM card, removing the battery causes a quick power down of the SIM IF.
Issue 1
COMPANY CONFIDENTIAL
Page 8 –17
Copyright © 2009 Nokia. All rights reserved.