Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
1. Before starting the installation, determine where in
the flue the mineral woll seal should be placed .
Clean the inside of the hood with a steel brush remo-
ving soot and loose mortar. Remove the old damper
if it is an obstruction during installation.
Mineral wool
2. Fix the support leg to the flange of the first cast
iron tube. Fix the other tubes with joint glue and make
sure that the seals are tightly filled. Mount the mineral
wool on the top tube and fix it wth the steel wire. The
top of the tube and the mineral wool must be level to
avoid soot building up adjacent to the tube.
Tip! Fix the cast iron tubes upside down on the floor
and wedge the seals with small roof nails for better
stability.
Support Leg
3. Bring the mounted tube pack to it´s designated
place so that it rests on the support leg. It is nor-
mally possible to remove the support leg when the
installation is finished and it can be used again in
other installations, thats why it is an accessorie.
- 5 -
Advertisement
Table of Contents
