Table of Contents
Advertisement
Miracast
You can view the screen from smartphones and PC on your TV
connected to the devices via Wi-Fi CERTIFIED Wi-Fi DirectN.
Using Miracast
1
Press Z and use J K to Select Miracast, then press OK.
Miracast mode screen appears.
●
The TV is now ready to accept a Push Button Connection (PBC) from your source device.
SANYO_Smart_TV
If you want to exit, please press "BACK" key.
If you want to manage connected device history, please press "OPTIONS".
Your TV name
2
Activate Miracast feature on your device.
For the operation of your device, please check the instruction
●
manual of the device.
Select Your TV name on your device if needed.
●
If PIN code is required on your device, please enter the 8-digit code
●
appearing in the left-hand side of the TV screen.
3
Once connected, the screen of your device will appear on your TV
screen.
Press INFO to display Your Device name at the bottom of TV
●
screen.
Press K F or OK to pause playback. Press K F or OK again to
●
resume playback.
Using Miracast device list
In Miracast device list, you can find the connected devices.
1
Press OPTIONS on Miracast mode screen.
Connected device names are only listed.
●
It will be sorted from newest connection to oldest connection. A
●
maximum of 64 connections can be recognized.
If you would like to delete a listed connection, press H I to Select
●
the device name, then press OK first. Once the confirmation
message appears, please use J K to Select Yes, then press OK.
Note(s)
Connectivity with all Miracast compatible devices is not guaranteed.
●
Devices that do not comply with Miracast™ standards may have compatibility issues.
●
45
.
English
View photos, play music and watch
videos using Home network
On your TV you can play video, music and photo files stored on Home
network certified home media servers connected to your home network.
In order to use this feature, you must connect this unit to the Internet.
It is recommended that files to be played back in this unit are
recorded under the following specifications:
Picture (JPEG / Progressive JPEG)
JPEG
Upper limit
4000x4000 pixels
Progressive JPEG
Upper limit
1024x768 pixels
Music (MP3 / WAV / AAC)
Sampling frequency
16 kHz - 48 kHz
MP3
Constant bit rate
8 kbps - 320 kbps
Sampling frequency
8 kHz - 48 kHz
WAV
Constant bit rate
64 kbps - 1.5 Mbps
Sampling frequency
8 kHz - 48 kHz
AAC
Constant bit rate
-
Video (MPEG / VOB / AVI / MP4)
H.264, H.265/HEVC: 3840x2160@30fps,
Maximum Video
MPEG: 1920x1080@60fps
.mpg,
.ts, .trp,
Extension
.avi
.vob
.mp4
.mkv
.mpeg
.tp
MPEG1,
MPEG1,
MPEG1,
MPEG1,
MPEG2,
MPEG2,
MPEG1,
MPEG2,
Video codec
MPEG2,
MPEG1,
MPEG4,
MPEG4,
MPEG2,
H.264,
MPEG4,
MPEG2
H.264,
H.264,
MPEG4
H.265/
Audio codec
H.264
H.265/
H.265/
HEVC
HEVC
HEVC
Dolby Digital
YES
YES
YES
YES
YES
YES
MPEG1/2 audio
YES
YES
YES
YES
NO
YES
layer1/2/3
LPCM
YES
YES
YES
YES
YES
YES
AAC-LC
YES
YES
YES
YES
YES
YES
Note(s)
A maximum of 1,023 folders or files can be recognized.
●
For the home server list, maximum of 16 servers can be displayed.
●
The 10th and deeper hierarchies cannot be displayed.
●
Unplayable files in the home server will not be displayed in the file list.
●
For some files, playback is not available even if displayed in the file list.
●
In order to play back the contents in home servers, the player and the servers must be
●
connected to the same access point.
Compatibility and available playback function may differ depending on the home server.
●
Video files with unsupported audio format will be skipped.
●
The quality of the playback picture or audio differs depending on your network condition
●
Before using Home network
Follow the procedure below before using Home network.
1
Connect this unit to the Internet.
Connecting the TV to the Internet using an Ethernet cable L
p. 14 or Connecting the TV to the Internet using a Wireless
LAN L p. 15
Broadband Internet connection of 8Mbps or faster is required.
●
2
Set up the necessary Network Connection Settings. Connect to
network L p. 38
Continued on next page.
Hide quick links:
Advertisement
Table of Contents
