Motorola i870 User Manual page 39

4 Select a code.
5 When you are finished, press A under Back to
return to the MOTOtalk idle screen.
Making Code Calls
To make a code call:
1 From the MOTOtalk idle screen or the channel
and code edit screen, press and hold the PTT
button. Transmit appears on the first line of
display. Begin speaking after your phone emits
the MOTOtalk tone.
Note: The MOTOtalk tone consists of 4 rapid
beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
Receiving Code Calls
When you receive a code call, Receive will appear
on the display. After hearing the MOTOtalk tone,
you have 6 seconds to reply before the call times
out.
To reply to the call, press the PTT button.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing e.
Receiving All MOTOtalk Calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone
that is set to the same channel, regardless of the
code (1-15). When you receive transmissions with
the code set to Receive All, the code that the
transmission was received on will replace Receive
All on the display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the MOTOtalk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Receive All.
5 When you are finished, press A under Back to
return to the MOTOtalk idle screen.
To reply to a call with the code set to Receive All:
Press the PTT button.
Channels and Codes
27