Guarantee - AEG MC 4401 CD Instruction Manual & Guarantee

Description of the CD buttons
/ II PLAY/PAUSE (11/B): You can briefl y interrupt the
I SKIP/SEARCH (28/A):
I SKIP/SEARCH (12/C):
STOP (29/E):
REPEAT (27/D):
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key.
2. Press the PRO(GRAM) key (13/F). The number „00"
(storage location) and the symbol PROGRAM fl ash
in the display (13). Use the SKIP
select the desired track and then press the PROG
button again. Repeat the procedure until all the desi-
red tracks are selected.
3. Press the /II PLAY/PAUSE button. The playback
starts. The PROGRAM display fl ashes. Press this
button to pause briefl y the playback (see the section
on PLAY/PAUSE).
4. Press once the STOP key to stop the playback while
retaining the program.
5. To play the programme again, please fi rst press the
PRO button (13/F) and then the
key.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence remains in the memory until the CD is taken
out of the CD deck or until the device is switched off. In
order to play back the programme and order of tracks
again, please press the PRO button fi rst and then the
PLAY/PAUSE key.
5....-05-MC 4401 CD AEG 33
playing. Renewed pressing
of the button will re-start
the playing from the same
place.
The symbol in the display
(3) fl ashes.
Press once =
This starts the current track
again from the beginning.
Press a second time =
This jumps back to the
previous track.
Press a third time =
This plays the song before
etc. If the button is kept
pressed down, the machine
starts to search through the
tracks.
With this button you can
jump to the following track
or the next track but one
etc. If the button is kept
pressed down, the machine
starts to search through the
tracks.
The CD is stopped.
Press once =
he current track is repeated
continuously (REPEAT
appears in the display)
Press a second time =
the whole CD is played
continuously (REPEAT ALL
appears in the display)
Press a third time:
the function is deactivated.
I / I
buttons to
/ II PLAY/PAUSE
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the REPEAT button
(27/D) up to three times and then you can use the func-
tions as described under „REPEAT".
Note: Compact Disks:
• This device is able to play CDs with a diameter of
8 cm and 12 cm. Note: Only place one disc in the CD
compartment at a time.
• Only audio CDs, CD-R and CD-RW disks can be
played on this machine.
• Always place the CD into the CD compartment with
the label facing upwards. Compact discs can only be
played on one side.
• Fingerprints and dust should be carefully removed
from the recorded side of the CD (the side without
the label) with a soft cloth. Wipe off in straight lines
from the centre to the edge.
• After being played, CDs should be returned to their
case so that they do not become scratched.
• Do not expose CDs to direct sunlight, high humidity
levels or prolonged high temperatures in order to
prevent them from warping.
• Do not adhere any paper to the CD or write on it.
• Do not spray any cleaning agents or antistatic sprays
on to the CD as in the case of phonographs.
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibili-
ty and low voltage directives, and has been constructed
in accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or,
at our discretion, by replacing it. The guarantee services
do not entail an extension of the life of the guarantee nor
do they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
For repairs or replacement during the life of the guaran-
tee return the device in its original packing together with
the proof of purchase to your dealer.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are
to be paid!
The guarantee lapses in case of unauthorized tampering.
33
11.02.2004, 11:54:50 Uhr