Connect the transmitter with the power plug to a
X
X
power supply or charge it regularly.
Use one of the supplied cables to connect the
X
X
transmitter to an external device
(refer to graphic on previous page).
Press on/off switch to turn the transmitter on.
X
X
The LED on the transmitter flashes blue while
searching a connection to your miniTek.
Use the supplied adhesive tape to affix the transmitter
X
X
at a suitable place.
Press
X
X
miniTek on.
Press
X
X
manually (refer to table "Changing the audio source" in
chapter "Basic function").
flashes while your miniTek is searching for a
connection and it shines constantly if a connection is
established.
The LED on the transmitter shines blue if a connection
is established.
Each time you press
next available audio source according to table „Changing
the audio source" in chapter „Basic functions".
24
Using the transmitter
for about 3 seconds to turn the
on miniTek to change to the audio source
, your miniTek switches to the