and Care of Filters
c. Install new filters in the filter housing
track with the glue beads of the wick-
ing pad to the inside of the filter hous-
the top cover
of the filter
housing by installing the cover over
the fixed tabs on the rear of the lower
filter housing and pivoting the cover
down over the top of the filters. Snap
the cover over the two spring tabs.
e. Replace the filter housing in the cab-
inet. Note: There is a front and back
" Be sure that the spring tabs of filter
housings are towards front of cabi-
, Align the lower portion of the filter
assembly over the six ribs located at
the bottom rear of the humidifier cab-
f. Position fan assembly onto the cabi-
net. Make sure the fan venturi (low-
est cylinder section below the fan) is
placed inside the filter housing.
g. Replace water bottles.
h. Close the pivoting lid.
i. The unit is ready for use or to be
stored away for next season.
of FHter Housing
Bask of Cabinet
Front of Cabinet
Step 4 e.