Black & Decker BDWM1000 Instruction Manual page 3

90539119 BDWM1000 6/5/08
4. To lock the side supports, push out from
the inside until the support locks into
position (figure C.)
Unsafe Operation. Make sure all four legs
and both side supports are locked in place.
5. After locking the side supports in place,
lift the center support section by the
carrying handle until you hear it "click" into
place as shown in figure D.
6. When the center support section is
properly locked in position, the LOCK button
shown in figure E will be visible.
CAUTION: Risk of Unsafe Operation.
Make sure the center support section is
locked in place.
CLOSING THE WORKBENCH
1. Fold the center support section down and
push in on the side supports to unlock them.
(figure F)
10:17 AM Page 3
C
CAUTION: Risk of
D
E
F
3