12.
Set a delayed wash
If you do not want to begin a cycle immediately, you may
choose the Delay Hrs. option. This will delay the start of the
wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch SELECT DELAY HRS. to set the desired delay time.
2. Touch and hold START to start the delay countdown. The
countdown stops blinking.
13.
Touch and hold START to begin
wash cycle
Touch and hold START to start the wash cycle. To pause
a cycle in progress, touch START once, then touch and
hold again to continue the cycle. To cancel a cycle, touch
POWER/CANCEL.
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked
during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
“Add a Garment” light is lit. The time allowed
to add a garment will vary based on cycle
selection and load size.
Touch START once; the door will unlock once
the washer movement has stopped. This may
take several minutes. Then close the door and
touch and hold START again to restart the cycle.
Adding items after “Add a Garment” light
is off:
Cancel current cycle. Water will drain and you
will need to reselect cycle and restart.
For wash performance and optimal energy
savings, add garments only when the “Add
a Garment” light is on.