Download  Print this page

Troubleshooting - Whirlpool WED9290FC HybridCare Installation Instructions Manual

Heat pump dryer
Hide thumbs

Advertisement

5.
Reinstall hinge and latch on
opposite sides
Using a T25
®
screwdriver, reinstall the latch plate and latch
backing plate with the 3 TORX
the hinge assembly with the 5 screws on the opposite sides
from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
26
®
screws removed earlier and
Bottom
of door
7.
Reinstall door on dryer
Using a T25
®
screwdriver, remove the 4 screws on the dryer.
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with
the 4 screws removed earlier.

Troubleshooting

See the Use and Care Guide or visit our website and reference
Frequently Asked Questions to possibly avoid the cost of a
service call.

Advertisement

loading

  Related Manuals for Whirlpool WED9290FC HybridCare