Operation - Sharp IG-A20A? IG-A40A Operation Manual

OPERATION

*This operation manual is based on IG-A40A.
The operation is same as IG-A20A.
Open the cover of Control Panel.
In case that the cover is fixed by a screw, take out the
gum cover and a screw, and open the cover of control
panel.
Fix the cover of Control Panel.
As necessary, screw down the cover with the provided
screw and the washer and fi t in the gum cover.
(Please see Page E-3)
Press the Operation Button to select the preferred mode.
OPERATION BUTTON
AUTO RESTART
LOW
MED
HIGH
Power 'OFF'
AUTO RESTART
Switch
E-6
Control
panel
Release high-density
Plasmacluster ions quietly.
Release high-density
Plasmacluster ions at medium fan
speed.
Increase the volume of high-
density Plasmacluster ions to
increase the purifi ying capacity.
If the AUTO RESTART switch sets "ON" and
then the product is accidentally unplugged or
the breaker trips during use,it automatically
starts operating with previous mode after
electric reset.