Table of Contents

Advertisement

Available languages

Available languages

Usage

USAGE
Energy saving: This is a very practical appliance for steering
the tea. When starts operating, it boils the water in a short time
and automatically reduces the energy wastage to about %90
and keeps the water warm. In this case, the appliance boils the
water in min level and prevents overmuch evaporation, keeps
the tea warm in the teapot, keeps energy safe. When adding
the water into the kettle, for boiling the water quickly
boiling/keep warm switch (5) must be ON. After the water boils,
the heating becomes to min level and keeps the water warm.
In other meaning, after adding some water in to the kettle,
switch boiling / keep warm switch and main switch ON
position, after the tea service over, you need to switch OFF
only the main switch (5). After you pushed the keep warm /
boiling switch; the appliance automatically keeps the water and
tea warm.
• Please do not switch ON the main switch (5) without any water
in the kettle or if the water is under min level. If there is no
water left in the kettle, please turn off the main switch. In this
kind of situations, for the security reasons the appliance is
protected by 2 pcs of thermostat.
• This appliance is also can be used as a kettle. In this case, the
top part of the appliance can be covered by a teapot cover.
Because being in energy safe mode, the kettle keeps the
warm safe and helps you to find warm water in every period.
Preparing tea: Plug the appliance in to the wall socket. When
not using the appliance, please make sure that you switched
OFF the main switch.
• Pour the water between min and max levels depending to the
tea quantity that you want to steer. Place the kettle on to the
power base. Open the teapot lid, replace the tea filter. Put
some tea in to the filter and pour some water on the tea and
then place the filter into the teapot. Slide the main switch to (I)
and boiling / keep warm switch to ( ON ) position. The red pilot
light on the handle turns ON and the water starts to heat.
Depending to the water quantity, water start boiling in 3-10
minutes time and boiling / keep warm switch goes on ( OFF )
position and starts to keep the water and tea warm. After that,
the red light turns OFF and the green light turns ON. You could
steer the tea with boiled water and then place the teapot top of
the kettle. If necessary, you could add some water in to the
kettle. If you add some more water, you need to switch ON the
boiling / keep warm switch.
GB
23

Advertisement

Chapters

Table of Contents
loading

Table of Contents