Before Using For The First Time - Miele W 3923 WPS Operating Instructions Manual

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry and
without detergent.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
The display for setting the language will
then appear.
Downloaded From WashingMachine-Manual.com Manuals

Before using for the first time

Setting the language
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the Settings menu.
Sprache
deutsch
.
^ If the language shown is not the one
you want, select the language you do
want by pressing the left hand Menu
button under
selection by pressing the right hand
Menu button under OK.
Setting the time of day
The display for setting the time will then
appear.
Change
^ Select the hours you want by
pressing the left hand Menu button
under Change, and confirm this with
the right hand Menu button under
OK.
^ Then set and confirm the minutes.
OK
.
. Confirm your
12:00
OK
13