Specifications - Bosch PST 1000 PEL Original Instructions Manual

OBJ_BUCH-1053-003.book Page 15 Sunday, April 7, 2013 3:02 PM
Product Description and

Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-on button for On/Off switch
2 Thumbwheel for stroke rate preselection
3 On/Off switch
4 Vacuum hose*
5 Vacuum connection
6 Base plate clamping lever (PST 1000 PEL)
7 Base plate
8 Adjusting lever for orbital action
9 Switch for sawdust blowing device
10 Dust cover for vacuuming
11 Sliding shoe (PST 1000 PEL)
12 "Cut Control" viewing window
13 "Cut Control" base
14 Worklight
15 Handle (insulated gripping surface)
16 Stroke rod
17 SDS clamping lever for saw blade release
18 Guide roller
19 Saw blade*
20 Contact protector
21 Saw blade storage (PST 900 PEL)
22 Splinter guard*
23 Lead for the parallel guide
24 Screw (PST 900 PEL)
25 Scale for mitre angle
26 Parallel guide with circle cutter*
27 Locking screw for parallel guide*
28 Centring tip of the circle cutter
29 Cutting mark, 0°
30 Cutting mark, 45°
31 Cutting mark, 45° (with sliding shoe) (PST 1000 PEL)
Bosch Power Tools
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Jigsaw PST 900 PEL PST 1000 PEL
Article number 3 603 CA0 2.. 3 603 CA0 3..
"Cut Control"
Stroke rate control
Stroke rate
preselection
Orbital action
Rated power input W
Output power W
Stroke rate at no
-1
load n min 500 –3100
0
Stroke mm
Cutting capacity,
max.
– in wood mm
– in aluminium mm
– in non-alloy steel mm
Bevel cuts
(left/right), max. °
Weight according to
EPTA-Procedure
01/2003 kg
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined
according to EN 60745.
Typically the A-weighted noise levels
of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values a (triax vector
h
sum) and uncertainty K determined
according to EN 60745:
Cutting board:
a
h
K
Cutting sheet metal:
a
h
K
English | 15
 
 
 
 
620 650
340 360
500 –3100
23 23
90 100
15 20
8 10
45 45
2.1 2.2
/II /II
dB(A) 86 86
dB 97 97
dB(A) 3 3
2
m/s 11.5 10.0
2
m/s 4.0 2.0
2
m/s 8.5 7.0
2
m/s 2.0 2.0
1 609 92A 06R | (7.4.13)