Meat Thermometer; Oven Vent - KitchenAid KDRS407VSS Use And Care Manual

USING YOUR OVEN
2.
Lift up rack/shelf rear.
Using 2 hands, lift up back of rack and sliding shelf so that
back and front are level on rack guide. Pull out.
To Replace the Roll-Out Extension Rack:
1.
Place on rack guide.
Using 2 hands, grasp front of the closed rack and sliding shelf.
Place the closed rack and sliding shelf on the rack guide.
2.
Slide in rack/shelf
Slowly push the rack and sliding shelf to the back of oven until
the back edge of the sliding shelf drops.
3.
Pull rack/shelf forward
Pull the rack and sliding shelf slightly forward until the front
edge drops and the sliding shelf is on the rack guide.
16
Know your Racks
To avoid damage to the sliding shelves, do not place more
■
than 25 lbs (11.4 kg) on the rack.
Do not clean the roll-out extension rack in a dishwasher. It
■
may remove the rack's lubricant and affect its ability to slide.
See the "Care and Cleaning" section for more information.
■

Meat Thermometer

When not using the supplied temperature probe, use a meat
thermometer to determine whether meat, poultry, and fish
are cooked to the desired degree of doneness. The internal
temperature, not appearance, should be used to determine
doneness. A meat thermometer is not supplied with this
appliance. Follow manufacturer's directions for using a meat
thermometer.

Oven Vent

The oven vent should not
be blocked or covered
since it allows the release
of hot air and moisture
from the oven. Blocking
or covering the vent will
cause poor air circulation,
affecting cooking and
cleaning results. Do not
put plastics, paper, or
other items that could
melt near the oven vent.
1
A
Oven vent
1