Custom Installation - Panasonic KV-S1025C Operating Instructions Manual

Installing Software

Custom installation

Each driver, utility, and manual can be installed using the Custom installation selection, as required.
1
Turn off the power of the scanner (only when installing Device Driver).
2
Insert the CD-ROM into your CD/DVD drive on your computer.
3
If you have a feature called 'Autorun' activated, this will start the installation process
automatically
Note:
• If the AutoPlay dialog box is displayed in Windows Vista, select 'CDRun.exe'.
• If the program does not automatically start, click [Start], click [Run...], click [Browse...], and select the CD/
DVD drive containing the installation software, double-click on "CDRun.exe" in the root directory to
manually start the installation routine, then click [OK].
4
Select your scanner.
5
Select the [Custom] from the [Installation] list.
6
Select a driver, an utility, or a manual.
If the screen 'Windows can't verify the publisher of this driver software' appears, continue
with the installation by selecting 'Install this driver software anyway'.
7
Follow the instructions on the screen.
When installing device driver, proceed following steps.
8
Turn on the power of the scanner.
9
Follow the instructions of the hardware wizard to complete the installation.
The installation process is performed automatically in Windows Vista.
'
Even if the screen Digital Signature was not found for this driver
appears, continue with the installation.
16
' or '
has not passed Windows Logo testing···
'