(3) Paper feed roller removal
1) Pull out the shaft.
2) Remove the clutch boss and the clutch spring from the pickup
roller.
2
(4) Pickup roller removal
1) Disengage one pawl.
2) Remove the pickup drive gear from the pickup roller.
2
I. Paper empty sensor
(1) Paper feed PG unit removal
1) Remove the harness.
2) Remove three screws.
3) Lift the front side, and remove the paper feed PG unit.
3
2
1
3
1
2
1
MR-2019/2018/MY-1034 DISASSEMBLY AND ASSEMBLY 5 - 4
(2) Paper feed PG support plate removal
1) Remove one screw.
2) Slide and remove the paper feed PG support plate.
1
2
(3) Paper empty sensor removal
1) Disconnect one connector.
2) Remove the paper empty sensor.
1
J. PS roller
(1) Parts removal
1) Remove the gear.
2) Remove the pulley.
3) Remove the belt.
2
3
1
2