Panasonic KX-TDE100 User Manual page 9

Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

Attention
Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors, and televisions. These noise sources can interfere with the performance of
the PBX.
This unit should be kept free of dust, moisture, high temperature (more than 40
should not be exposed to direct sunlight.
If you are having problems making calls to outside destinations, follow this procedure to test the outside
lines:
1.
Disconnect the PBX from all outside lines.
2.
Connect known working single line telephones (SLTs) to those outside lines.
3.
Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the outside line that the SLT is
connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the
outside lines until it has been serviced by an authorised Panasonic Factory Service Centre.
Never attempt to insert wires, pins, etc. into the vents or holes of this unit.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical agents such
as benzene or thinner.
When using a Panasonic proprietary telephone (PT), use only the correct Panasonic handset.
For users of PC Phone (Free Licence Version) shipped with KX-T7601 USB Module:
All features of the PC Phone software are available for 90 days from the date of installation.
After this period expires, the following buttons on the Operation Screen will become unavailable:
Recording
TAM
Voice Memo
Text Memo
Speed
To continue using any of the corresponding features after the trial period, please purchase KX-
TDA0350 (PC Phone, 5 licences).
), and vibration, and
˚C
User Manual
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents