Download  Print this page

Fuel Level Adjustment; Float Removal; Fuel System Cleanliness Inspection - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Carburetor

Fuel Level Adjustment

Gasoline is extremely flammable and can be explosive under
certain conditions. Always stop the engine and do not smoke.
Make sure the area is well-ventilated and from any source of
flame or sparks; this includes any appliance with a pilot light.
Remove the carburetor, drain the fuel into a suitable container.
Remove the float bowl [A] taking out the screws [B] with lockwashers.
Check the float level.
[A] Float
[B] Float Valve Needle Rod (contacted but unloaded).
[C] Float bowl mating surface
[D] Float height
Float Height
10.7 ± 2 mm
If the float height is incorrect, the float height can not be adjusted on
this model. Inspect the float, float valve needle,
Float height is the distance from the float bowl mating surface of
the carburetor body (with the gasket removed) to the top of the
float.
Do not push the needle rod in during the float height measurement.
Measure the height with the carburetor upside down.

Float Removal

Remove the carburetor and disassembly the float bowl.
Drive out the pivot pin [A] and remove the float [B] and float valve as
a set.

Fuel System Cleanliness Inspection

Gasoline is extremely flammable and can be explosive under
certain conditions. Always stop the engine and do not smoke.
Make sure the area is well-ventilated and free from any source
of flame or sparks; this includes any appliance with a pilot
light.
Make sure the engine is cold before working. Wipe any fuel
off the engine before starting it.
NOTE
FUEL SYSTEM 3-9

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: