Throttle Grip and Cable
Free Play Inspection
Refer to Free Play Inspection in the Periodic Maintenance Chapter.
Free Play Adjustment
Refer to Free Play Adjustment in the Periodic Maintenance Chapter.
Throttle Cable and Choke Cable Installation
Install the throttle cable and choke cable in accordance with the Cable,
Harness, Hose Routing section in the General Information chapter.
After the installation, adjust each cable properly.
Operation with an incorrectly routed or improperly adjusted
cable result in an unsafe riding condition.
Cable Lubrication and Inspection
Whenever the choke cable or the throttle cable are removed or in
accordance with the Periodic Maintenance Chart, lubricate the these
cables. Refer to General Lubrication in the Periodic Maintenance
Apply a thin coating of grease to the cable upper or lower ends.
Use a commercially available pressure cable lubricator to lubricate
With the cable disconnected at both ends, the cable should move
freely in the cable housing.
FUEL SYSTEM 3-7