Download  Print this page

Oil Filter Element Change - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Table of Contents
Periodic Maintenance Procedures
After the oil has completely drained, install the drain plug with its
gasket.
Replace the drain plug gasket with a new one if it is damaged.
Tighten the drain plug.
Torque -
Engine Oil Drain Plug: 29 N
Pour in the specified type and amount of oil.
Recommended Engine Oil
Type:
Viscosity:
Capacity:
Depending on the atmospheric temperature of your riding area, the
engine oil viscosity should be changed according to the right chart:

Oil Filter Element Change

Drain the engine oil.
Remove the engine guard (see Engine Removal section in the Engine
Removal/Installation chapter).
Remove the oil filter cap bolts [A] and oil filter cap [B].
Replace the filter element with a new one.
Set the spring into the oil filter cap.
Install the filter element so that the bypass valve [A] side outward.
Fit a new O-ring onto the oil filter cap.
Apply grease to the O-ring.
Install the oil filter cap.
Torque -
Oil Filter Cap Bolts: 5.2 N
m (3.0 kgf
m, 21 ft
lb)
1
1
1
API SE, SF or SG
API SH or SJ with JASO MA
SAE10W-40
1.1 L (When engine is completely dry)
1.0 L (When filter is removed)
0.9 L (When filter is not removed)
NOTE
NOTE
m (0.53 kgf
m, 46 in
lb)
1
1
1
PERIODIC MAINTENANCE 2-9

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: