Download  Print this page

Rear Shock Absorber; Removal; Installation; Rear Shock Absorber Inspection - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Table of Contents

Rear Shock Absorber

Removal

Using the jack under the frame, raise the rear wheel off the ground.
Special Tool -
Jack: 57001–1238
Remove the shock absorber mounting bolt [A], nut and pull off the
shock absorber [B].
To remove the rubber bushings [A], tap out the bushing with a suitable
tool.

Installation

Press in the rubber bushings [A] as shown.
Install the shock absorber.
Tighten the shock absorber mounting bolt and nut.
Torque -
Upper Mounting Bolt: 39 N
Lower Mounting Bolt: 39 N

Rear Shock Absorber Inspection

Refer to Rear Shock Absorber Inspection in the Periodic Maintenance
Chapter.
m (4.0 kgf
m, 29 ft
lb)
1
1
1
m (4.0 kgf
m, 29 ft
lb)
1
1
1
SUSPENSION 12-11

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: