Download  Print this page

Camshaft Wear Inspection; Brake Shoe Springs Inspection; Brake Panel Lubrication - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Table of Contents
Brake Panel and Drum

Camshaft Wear Inspection

Measure the shaft diameter [A].
If it is worn down to less than the service limit, replace the shaft.
Measure the inside diameter [B] of the camshaft hole.
If it is worn past the service limit, replace the brake panel.
Camshaft Diameter
Front:
Standard:
Service Limit:
Rear:
Standard:
Service Limit:
Cmshaft Hole Inside Diameter
Front:
Standard:
Service Limit:
Rear:
Standard:
Service Limit:

Brake Shoe Springs Inspection

Visually inspect the brake shoe springs for breaks or distortion.
If the springs are damaged in any way, replace them.
Measure [A] the free length of the brake shoe springs.
If either is stretched beyond the service limit, replace both springs.
Brake Shoe Springs Inspection
Front:
Standard:
Service Limit:
Rear:
Standard:
Service Limit:

Brake Panel Lubrication

Refer to Brake Panel Lubrication in the Periodic Maintenance Chapter.
11.957
11.984 mm
11.88 mm
14.957
14.984 mm
14.88 mm
12.000
12.027 mm
12.15 mm
15.000
15.027 mm
15.15 mm
30.8
31.2 mm
32.6mm
32.5 mm
34.1 mm
BRAKES 11-11

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: