Download  Print this page

Brake Pedal And Rod Installation - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Table of Contents
11-8 BRAKES
Brake Lever, Brake Pedal
Brake Pedal Return Spring [A]
Brake Pedal Mounting Bolt [B]
Brake Pedal [C] with Rod [D]
Cotter Pin [A]
Washer [B]
O-rings [C]

Brake Pedal and Rod Installation

Brake pedal and rod installation is the reverse of removal.
Bend the cotter pin [A] securely on both side as shown.
Apply a multi purpose grease to the pedal pivot and O-rings.
Before installing the brake pedal, set in the return spring each end to
the brake pedal.
Install the return spring [A] so that its long hook portion [B] faces
downward.
Tighten the brake pedal mounting bolt.
Torque -
Brake Pedal Mounting Bolt: 8.8 N
Adjust the brake pedal free play.
m (0.9 kgf
m, 79 in
lb)
1
1
1

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: