Download  Print this page

Oil Filter Element/oil Screen; Oil Filter Element Change; Oil Screen Cleaning - Kawasaki KLX110 Service Manual

Hide thumbs

Advertisement

Oil Filter Element/Oil Screen

Oil Filter Element Change

Refer to Oil Filter Element Change in the Periodic Maintenance
Chapter.

Oil Screen Cleaning

Drain the engine oil.
Remove the clutch cover (see Clutch chapter).
Pull out the oil screen [A].
Clean the screen with high-flash-point solvent, and then dry it.
Clean the screen thoroughly whenever the engine oil is changed.
While cleaning the screen, check for any metal particles that engine
indicate internal damage.
Clean the oil screen in a well-ventilated area, and take care
that there are no sparks or flame anywhere near the working
area, this includes any appliance with a pilot light.
Do not use gasoline or a low-flash-point solvent to clean the
oil screen. A fire or explosion could result.
Replace the screen with a new one if it is damaged.
Install:
Oil Screen
Clutch Cover
NOTE
ENGINE LUBRICATION SYSTEM 6-7

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

Comments to this Manuals

Symbols: 0
Latest comments: