Technical Data; Working Condition; Declaration Of Conformity; The Machine - Bosch AMW LB Original Instructions Manual

OBJ_DOKU-41374-002.fm Page 10 Tuesday, August 19, 2014 3:39 PM
10 | English
– before changing the multi-tool at-
tachment
 The extension pole may not be fitted
to the blower attachment.
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
 After use, disconnect the machine
from the mains and check for damage.
 Keep all nuts, bolts and screws tight
to be sure that the machine is in safe

working condition.

 Examine the machine and replace
worn or damaged parts for safety.
 Replace worn or damaged parts for
safety.
 Ensure replacement parts fitted are
Bosch approved.
 Store the machine in a secure, dry
place out of the reach of children.
Do not place other objects on top of

the machine.

Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Wear protective gloves
Movement direction
Audible noise

Intended Use

This multi-tool attachment can only be operated by the power
unit AMW 10.
The product is intended for blowing leaves, garden waste
such as grass, twigs and pine needles.
F 016 L81 119 | (19.8.14)

Technical Data

Pole Leaf Blower Attachment
Article number
No-load speed
Air speed, max.
Volume flow rate, max.
Weight according to
EPTA-Procedure 01/2003
Serial number
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Noise/Vibration Information
The following information is applicable for the attachment op-
erated by the power unit:
Sound emission values determined according to
EN 50636-2-100.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); sound power level
100 dB(A). Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values (triax vector sum): Vibration emission
2
value a = 3.5 m/s , Uncertainty K= 0.6 m/s
h

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" in combination with power
unit AMW 10 (3 600 HA3 0..) is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 50636-2-100.
2000/14/EC: Guaranteed sound power level 104 dB(A).
Conformity assessment procedure according to Annex V.
Equipment category: 34
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
11.06.2014
AMW LB
3 600 HA3 F00
-1
min 8000
km/h 220
3
m /h 320
kg 1.3
see type plate on the gar-
den product
2
.
Bosch Power Tools