19) Use the SRT-6 to open the three shown clips
holding the UI SHIELDING. Be careful not to
damage the ENGINE BOARD.
21) Separate the UI SHIELDING. Note that the
DISPLAY is attached to the ENGINE BOARD only
with the DISPLAY flex. Be careful not to damage
the DISPLAY FLEX.
23) Remove also the EARPIECE adhesive remains
from the UI SHIELDING.
15
Nokia I nternal Use Only | Copyright © 2012 Nokia | A ll rights reserved
20) Open also the two shown clips on the other
side. Be careful not to damage the ENGINE
BOARD.
22) Release the EARPIECE with the dental tool and
remove it. Be careful not to injure yourself with
the sharp end of the dental tool.
24) Remove the KEYMAT LIGHT GUIDE.
Nokia 109, C1-02i
(RM-907)
L1L2 Service Manual
V ersion 1.0