1 Fastening screw, brush roller
Tension the toothed belt at the fastening screw
and tighten the fastening screw using suitable
Screw in the toothed belt cover.
5.2.2 Replace the motor.
1 Toothed belt cover
2 Fastening screws
Unscrew locking screws.
Remove the fastening screw from the brush roller.
1 Toothed wheel, brush roller
2 Gear belt
3 Toothed drive wheel
Remove the toothed belts from the toothed
Pull the brush roller out of the brush head.
English 5.906-507.0 Rev. 00 (08/10)