2020 Lcd Panel, Hinges, And Lcd Cable - Lenovo ThinkPad T540p Maintenance Manual

Removal steps of the LCD front bezel
When installing:
Ensure that all the latches are attached firmly.

2020 LCD panel, hinges, and LCD cable

For access, remove these FRUs in order:
• "1010 Battery pack" on page 60
• "1030 Large bottom door" on page 62
• "1150 LCD unit" on page 84
• "s" on page 96
For models with thin LCD
Read this first before replacing the LCD panel for ThinkPad W540 models with a color sensor
Important:
If your LCD panel needs a replacement, order a special LCD panel FRU kit for color sensor model from Lenovo.
The FRU kit contains a LCD panel, a CD and an instruction flyer. For the correct FRU kit part number, check on
the Web site at http://www.lenovo.com/serviceparts-lookup.
To replace the LCD panel, be sure to follow these steps:
1. Before you replace the LCD panel, locate the label on the plastic jacket of the new LCD panel. Locate
the numeric key number on the label and record it.
2. Replace the failing LCD panel with the new one that was shipped to you.
3. Start the computer and enter the Windows operating environment.
4. Insert the CD that came with the new LCD panel. If the autorun function is enabled, the Panel
Replacement Utility program starts automatically. If the program does not start automatically, run the
program manually by exploring the CD and double-clicking PanelReplacementUtility.exe.
5. Follow the instructions on the screen to perform the initial color calibration. When the key number is
required, type the number that you recorded in step 1. Then the Panel Replacement Utility program
starts to measure the new LCD panel and perform the initial color calibration.
1
1
1
1
1
1
1
1
1
2
Chapter 9
1
.
Removing or replacing a FRU
97