Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Numark MPCD33
Summary of Contents for Numark MPCD33
- Page 1 MPCD33 PROFESSIONAL DUAL CD PLAYER MANUAL ©2002 Industries http://www.numark.com...
-
Page 2: Safety Instructions
Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated. Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. -
Page 3: Introduction And Registration
CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the MPCD33 by reading the following information before attempting to operate the unit. -
Page 4: Table Of Contents
Beat Matching Using Pitch Bend Example of Mixing Fader Start, Remote Switch Start Before Switching off the Power Troubleshooting Guide Information and Specifications Warranty ©2002 Numark Industries TABLE OF CONTENTS - The Leader in DJ Technology - 4 - http://www.numark.com... -
Page 5: Set-Up & Connections
3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman. DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). When the digital output is used the variable pitch slider and pitch bend buttons or pitch wheel should not be used. -
Page 6: Front Panel Features
Search Function: As explained under “SEARCH KNOB”, when search is press and you rotate the wheel, the music will rapidly scan the music to find a cue point. ©2002 Numark Industries - The Leader in DJ Technology - 6 -... -
Page 7: Display Features
SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. -
Page 8: Rear Panel
24. Voltage Selector - Set this switch to the voltage for your location. 25. RCA Audio Connectors - Connect your CD player to your mixer from this line level output. 26. Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you should not use variable pitch slider and the pitch bend buttons. -
Page 9: Mp3 File Playback (Must Read)
Due to differences in CD burning software some programs may work better than others. If you have difficulty with playback, try a CD burned with different software. ©2002 Numark Industries - The Leader in DJ Technology - 9 - MPCD33 http://www.numark.com... -
Page 10: Play, Pause And Cue Operations
EDITING CUE POINT When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you can confirm that this new cue point is desirable. -
Page 11: Track Selection, Programming, Relay Play
If the unit is in CONTINUOUS mode the play signal will be sent at the end of the full CD. Two CDs will play continuously, alternating from unit to unit. ©2002 Numark Industries - The Leader in DJ Technology... -
Page 12: Matching The Beats Per Minute (Bpm)
Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+”... -
Page 13: Example Of Mixing
PLAYER 2 Press the Pause button of Check you new cue point Listen with the monitor and Do a MIX! With a matching downbeat ©2002 Numark Industries PLAYER 1 OPEN/CLOSE button. PLAYER 2 OPEN/CLOSE button. PLAYER 2 Press search and rotate PLAYER 2. -
Page 14: Fader Start, Remote Switch Start
Typically if you press the switch once, the attached CD player will activate. When it is pressed again the unit will cue or pause depending upon CD player setting. -
Page 15: Troubleshooting Guide
Digital Output GENERAL Dimensions: Weight: Controller: 2.3 Kg Power Supply: Power Consumption: ©2002 Numark Industries Possible Cause Poor power plug connection at the AC outlet or IEC Power cord loose from rear of unit The disc is loaded upside down... -
Page 16: Warranty
Professional Disc Jockey Products What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (1) Year.
Need help?
Do you have a question about the MPCD33 and is the answer not in the manual?
Questions and answers