Panasonic KX-TDE600 Installation Manual page 218

Pure ip-pbx
Hide thumbs Also See for KX-TDE600:
Table of Contents

Advertisement

3.12.1 Connection of Peripherals
BGM/MOH
The PBX provides Background Music and Music on Hold. Up to 2 external music sources (e.g., user-supplied
radios) can be connected to the PBX.
CAUTION
Wiring should be done carefully to prevent undue force being exerted on the plug. Otherwise, sound
may only be heard intermittently.
External Music Jacks are SELV ports and should only be connected to approved SELV devices, or in
Australia, via the Line Isolation Unit with the Telecommunications Compliance Label.
Note
When the PBX and external music sources are not connected to the same earth, hum noise may be induced
into Background Music and Music on Hold.
Pager
Up to 2 paging devices (user-supplied) can be connected to the PBX.
CAUTION
External Paging Jacks are SELV ports and should only be connected to approved SELV devices, or in
Australia, via the Line Isolation Unit with the Telecommunications Compliance Label.
PC/Printer (via RS-232C)
The PBX is equipped with an RS-232C interface. This interface provides communication between the PBX
and the user-supplied devices such as PC or line printers. The RS-232C port is used for system programming,
SMDR, diagnostics and external system database storage (save/load) functions.
CAUTION
To protect the system, keep the following in mind:
1.
Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable) are
conductive. If they are not conductive, make sure that both connector cases of the cable are firmly
connected.
2.
If this is not possible, connect the frame of the PBX to the frame of the PC/Printer using an earthing
wire in order to prevent difference in the electrical potentials.
Pin Assignments
6
1
9
5
218
Installation Manual
No.
Signal Name
2
RD (RXD)
3
SD (TXD)
4
ER (DTR)
5
SG
6
DR (DSR)
7
RS (RTS)
8
CS (CTS)
Function
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Circuit Type
EIA
CCITT
BB
104
BA
103
CD
108.2
AB
102
CC
107
CA
105
CB
106

Advertisement

Table of Contents
loading

Table of Contents