Download  Print this page

Panasonic KX-TDA15 Installation Manual Page 114

Hybrid ip-pbx.
Hide thumbs

Advertisement

2.7 Connection of DECT Portable Stations
Registering the PS
The PS must be registered to the Hybrid IP-PBX before it can be used. Programming of both the PS and
Hybrid IP-PBX is required. A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform
the Hybrid IP-PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the Hybrid IP-PBX System Programming Mode Using a PT
Administrator Level
PROGRAM/
PAUSE
Note
means default value.
PS Registration
One PS can be registered to a maximum of 4 different Hybrid IP-PBXs.
[690]
ENTER
Using the KX-TCA155/KX-TCA255
Select
"Register H/set".
"Enter Base PIN".
114
Installation Manual
System Password for Administrator—
#
for PT Programming
PS No.
001 to 028
Press POWER
for 2 seconds.
Select
"Base 1–4".
PIN for PS Registration
= 1234
Extn. No.
1 to 4 digits
ENTER
Select
"Setting Handset".
"Please wait".
4 digits
Programming No.
3 digits
To the PS
operation
END
below
Select
"Registration".
C.Tone

Advertisement

Table of Contents

   Also See for Panasonic KX-TDA15

   Related Manuals for Panasonic KX-TDA15

Comments to this Manuals

Symbols: 0
Latest comments: