How to scan to a computer
Scanning a document
There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Load your document. (See How to load
documents on page 28.)
Use the ADF to scan multiple pages
of documents or 2-sided documents.
It feeds each sheet automatically.
Use the scanner glass to scan a
page of a book or one sheet at a
Do one of the following:
To scan using the SCAN key, go to
Scanning using the SCAN key.
To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
Downloaded from ManualsPrinter.com Manuals
Scanning using the
For more information, see Using the Scan
key in the Software User's Guide.
Choose the SCAN mode you want.
This function is available after you download
and install Presto! PageManager from
(For network users)
Choose the computer you want to send
the data to.
Press Start to begin scanning.
Scanning using a
For more information, see Scanning a
document using the TWAIN driver or
Scanning a document using the WIA driver in
the Software User's Guide.
Start a scanning application and click
the Scan button.
Adjust the settings such as Resolution,
Brightness and Scan Type in the
Scanner Setup dialog box.
Click Start or Scan to begin scanning.