Sending A Fax; How To Send A Fax - Brother DCP-J125 User Manual

4

Sending a fax

How to send a fax

The following steps show how to send a fax.
a
When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in blue.
 The LCD shows:
Press Start
Fax Resolution
Contrast
b
Do one of the following to load your
document:
 Place the document face down in the
ADF. (See Using the ADF
(MFC-J410 and MFC-J415W only)
on page 20.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 20.)
22
Downloaded from ManualsPrinter.com Manuals
Enter Number
Standard
Note
4
• If you send a mono fax from the ADF when
the memory is full it will be sent in real
time.
• You can use the scanner glass to fax
pages of a book one at a time. The
documents can be up to A4 or Letter size.
• To send colour faxes with multiple pages
use the ADF. (MFC-J410 and
MFC-J415W only)
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
(MFC-J410 and MFC-J415W only)
c
Set the scanner glass size, fax
resolution or contrast if you want to
change them.
For more advanced fax sending
operations and settings, see Sending a
fax in chapter 3 in the Advanced User's
Guide:

Broadcasting

Real Time TX

Overseas Mode

Fax Resolution

Contrast

Glass ScanSize
d
Enter the fax number.
Using the dial pad
Using the Phone Book

Speed Dial
Using call history

Outgoing Call

Caller ID hist.
4