Audio Setup - Philips DVP3850 User Manual

[Aspect ratio] - Select a display ratio that matches your TV screen.
[Picture Setting] - Select a predefined setting for picture color, or customize the setting.
[RGB] - Enable or disable the video output through TV OUT.

Audio setup

Analogue Output
General
Digital Audio
Volume
Video
Sound Mode
Night Mode
Audio
Preferences
[Analogue Output] - Adjust this setting for audio output through AUDIO OUT L/R .
• [Stereo] - Compress multi-channel Dolby digital sound to stereophonic sound.
• [LT/RT] - Compress multi-channel Dolby digital sound to 2-channel surround sound.
[Digital Audio] - Adjust this setting for audio output through COAXIAL/DIGITAL OUT.
• [Digital Output] - Select a type of digital output.
• [Off] - Disable digital output.
• [All] - Support multi-channel audio formats.
• [PCM Only] - Downmix to two-channel audio signal.
• [LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
Note
•
[LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only].
•
The higher the sampling rate, the better the sound quality.
[Volume] - Set the default volume level.
[Sound Mode] - Select a preset sound effect.
[Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a
low volume at night.
Note
•
Applicable to Dolby Digital encoded DVD discs only.
Stereo
Off
EN 15