Switching The Paper Source To Match The Purpose - Canon ip4700 series On-Screen Manual

Switching the Paper Source to Match the Purpose

> Printing from a Computer
Advanced Guide
Switching the Paper Source to Match the Purpose
Switching the Paper Source to Match the Purpose
In this printer, there are two paper sources, a rear tray and a cassette.
You can facilitate printing by selecting a paper source setting that matches your print conditions or
purpose.
The procedure for setting paper source is as follows:
You can also set the paper source on the Quick Setup tab.
1.
Open the printer driver setup window
2.
Select the paper source
From the Paper Source list on the Main tab, select the paper source that matches your purpose.
Automatically Select
Plain paper whose Page Size is Letter 8.5"x11", A5, A4, or B5 is fed from the cassette. Other sizes of
plain paper and paper types other than plain paper are fed from the rear tray.
Rear Tray
Paper is always fed from the rear tray.
Cassette
Paper is always fed from the cassette.
Important
Plain paper that is not Letter 8.5"x11", A5, A4, or B5 and paper types other than plain paper
cannot be fed from the cassette.
Continuous Autofeed
When plain paper runs out in the specified paper source, the printer automatically switches the
paper source.
When printing a large volume of data, load plain paper of the same size in both paper sources. You
can therefore reduce the trouble of having to load paper because the printer automatically switches
Downloaded from ManualsPrinter.com Manuals
> Printing with Other Application Software
Page 259 of 437 pages
> >
Various Printing Methods