Norton SpeedGrip Epoxy Adhesive Brochure

Road Worthy, Shop Tested,
Truck Line Adhesives
Urethane Adhesives
SMC/FRP Fiberglass Repair and
Panel Bonding
400ml 1:1 Cartridge
PART OEM APPROVED
NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME
04671 7773 3 minutes 3-1/2 minutes 10 minutes
04672
7779 10 minutes 17 minutes
04673 7770 35 minutes 50 minutes
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
600ml 1:1 Cartridge
PART OEM APPROVED
NUMBER PLIOGRIP® NO. OPEN TIME WORK TIME
04677
7773 3 minutes 3-1/2 minutes 10 minutes
04678 7779 10 minutes 17 minutes
04679 7770 35 minutes 50 minutes
USE APPLICATOR GUN #41397-PNEUMATIC. USE 18 ELEMENT MIXING NOZZLE #04627
Times will increase as Times shown above are Full cure time is 24 hours
temperatures decrease. at 77f/25c. but this may be
accelerated with heat.
Epoxy Adhesives
SMC/FRP
Fiberglass
Panel
Bonding
400ml 2:1 Cartridge
PART
NUMBER DESCRIPTION WORK TIME
04674 Epoxy Panel Bonding Adhesive 90 minutes
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628. GLASS BEADS FOR ADEQUATE SPACING.
Times will increase as temperatures Times shown above are at 77f/25c.
decrease.
Applicator Gun and Mixing Nozzle Guide
NORTON OFFERING PART
NUMBER
04674
Epoxy Panel Bonding Adhesive
Epoxy Rigid Repair Adhesive and Filler 04675
Epoxy Flexible Repair Adhesive and Filler 04676
04680
Fiberglass Matting Adhesive
Urethene Adhesive – 3 04671
Urethene Adhesive – 10 04672
04673
Urethene Adhesive – 35
Urethene Adhesive – 3 04677
Urethene Adhesive – 10 04678
04679
Urethene Adhesive – 35
1 866 879-3761
FOR TECHNICAL HELP:
www.nortonautomotive.com
OEM Approved:
CLAMPING OR SANDING OR
FIXTURE TIME PAINTING TIME
30 minutes
30 minutes 1 hour
1-1/2 hours 3 hours
CLAMPING OR SANDING OR
FIXTURE TIME PAINTING TIME
30 minutes
30 minutes 60 minutes
90 minutes 3 hours
Do not apply polyester
If polyester putty/filler must be used, skim coat
based putty/fillers on
over the SpeedGrip repair area using SpeedGrip
urethane products. Rigid Repair Adhesive
Repair Adhesive #04676.
CLAMPING OR SANDING OR
FIXTURE TIME PAINTING TIME
4 hours 8 hours
Full cure time is 24 hours but this may be
accelerated with heat.
18 ELEMENT 24 ELEMENT PNEUMATIC GUN
SIZE MIXING NOZZLE MIXING NOZZLE 400 ML
#04627 #04628 #41396
• •
400ml
• •
400ml
• •
400ml
• •
400ml
• •
400ml
• •
400ml
• •
400ml
•
600ml
•
600ml
•
600ml
®
OEM APPROVED
SMC/FRP Fiberglass Repair
Fiberglass Matting Adhesive
A low viscosity two-part urethane used to saturate fiberglass cloth when
preparing backup patches
The self-leveling feature allows the Matting Adhesive to be used for filling
cracks and channels as well
Fiberglass Mat
For reinforcing SMC, FRP and fiberglass repairs
Perfect for large repairs where extra reinforcement is needed
Fiberglass and SMC Cloth
Excellent for any backup repair – large or small
Conforms to any shape
400ml 1:1 Cartridge
PART
NUMBER DESCRIPTION
04680
Fiberglass Matting Adhesive
04690 Fiberglass Mat
04691 Fiberglass and SMC Cloth
#04675 or SpeedGrip Flexible
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628.
Rigid Parts Repair and Flexible Plastic
Parts Repair
Quickly repair SMC, FRP, fiberglass and plastic parts. Designed for easy
sanding and excellent feather edging, these products are a proven adhesive
and filler for all rigid and flexible parts. Formulated to finish the front side
of repairs used over the top of urethane adhesives.
400ml 1:1 Cartridge
PART
NUMBER DESCRIPTION
04675
Rigid Parts Epoxy Adhesive
USE APPLICATOR GUN #41398-MANUAL OR #41396-PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE #04628
400ml 1:1 Cartridge
PART
NUMBER DESCRIPTION
04676 Flexible Parts Epoxy Adhesive
04625
Adhesion Promoter for TPO Repair -
USE APPLICATOR GUN #41398 MANUAL OR #41396 PNEUMATIC. USE 24 ELEMENT MIXING NOZZLE
Accessories
MANUAL GUN PNEUMATIC GUN
400 ML 600 ML
#41398 #41397
•
•
•
•
•
PART
NUMBER DESCRIPTION
•
41396 Pneumatic Applicator Gun 400ml
•
41398 Manual Applicator Gun 400ml
•
41397
Pneumatic Applicator Gun 600ml
•
04627 Mixing Tip Square 18 Element (blue)
•
04628 Mixing Tip Square 24 Element (green)
© Saint-Gobain Abrasives, Inc. February 2007
PLIOGRIP® ADHESIVE Manufactured by Ashland Inc., Columbus,
OH • ®PLIOGRIP is a registered trademark of, Ashland Inc.
The Norton logo and SpeedGrip are registered trademarks of
Saint-Gobain Abrasives, Inc.
FORM # 7890
OEM APPROVED
PLIOGRIP® NO. SIZE
7779-L 400ml 1:1 cartridge
- 36" X 38" (9.5 sq. ft.)
- 36" X 38" (9.5 sq. ft.)
SANDING OR
WORK TIME PAINTING TIME
6 mintues 12 minutes
SANDING OR
WORK TIME PAINTING TIME
6 mintues 12 minutes
-
#04628
#04675
PART
NUMBER DESCRIPTION
04631 Structural Backing Patch
04632 Nylon Reinforcing Tape
04623
Plastic Parts Cleaner – 1 quart
82780
Panel & Adhesive Cleaner – 1 quart
SANDING OR
OPEN TIME PAINTING TIME
10 minutes 45 minutes
– –
– –
#04676
®