Canon MX490 series Online Manual page 919

2801
Cause
The document is jammed in the ADF.
Action
Remove the document following the procedure below.
Important
• Do not open the document cover if the document is jammed. The jammed document may be torn.
• The power cannot be turned off while the machine is sending or receiving a fax, or when the received
fax or the unsent fax are stored in the machine's memory.
Turn the machine off after making sure that it has completed sending or receiving all the faxes. Do
not unplug the power cord when turning the machine off.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
• If the original remains in the ADF by pressing the Stop button while the machine is scanning
the document:
If you press the Stop button during scanning then the document remained in the ADF, the message
about the paper remained in the ADF appears on the LCD. Press the OK button so that the remaining
document is automatically fed out.
• If the original is jammed in the ADF:
Remove the document following the procedure below.
1. If printing is in progress, press the Stop button.
2. Turn off the machine.
3. Open the document feeder cover slowly.
If a multi-page document is loaded, open the document feeder cover after removing any pages
other than the jammed page from the ADF.
4. Pull out the jammed document from the ADF.
Downloaded from ManualsPrinter.com Manuals 919