Canon MX490 series Online Manual page 253

Maintenance...
Displays the Maintenance screen to return the network settings of the printer to factory default
and to mount the card slot as the network drive.
Maintenance Screen
Set up printer's access point mode...
You can change the access point mode settings. Perform settings following the message on the
screen.
If you change the Encryption Method: setting and the Password: setting on the Set up printer's
access point mode screen, the changed settings are applied to the printer settings.
Note
• You can use this function only when you are using a computer compatible with the wireless LAN.
4. Help menu
Instructions
Displays this guide.
About
Displays the version of IJ Network Tool.
Downloaded from ManualsPrinter.com Manuals 253