Printing Out Network Setting Information - Canon MX490 series Online Manual

Printing Out Network Setting Information

You can print out the current network settings of the machine.
Important
• This print out contains valuable information about your computer. Handle it with care.
1. Make sure that the machine is turned on.
2. Load a sheet of A4 or Letter-sized plain paper.
3. Press the Setup button.
The Setup menu screen is displayed.
4. Use the
5. Use the
6. Use the
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Password
Communication Mode
Channel *1
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IPv4 IP Address
IPv4 Default Gateway
Downloaded from ManualsPrinter.com Manuals
button to select Device settings, then press the OK button.
button to select LAN settings, then press the OK button.
button to select Print LAN details, then press the OK button.
Explanations of the item
Wireless LAN
Connection status
MAC Address
SSID
Password
Communication Mode
Channel
Method of the Encryption
WEP Key Length
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address (IPv4)
Default Gateway (IPv4)
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN/SSID of the access
point mode
Password of the access point mode (8 to 10
alphanumeric characters)
Infrastructure/Access Point Mode
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/WPA2-PSK
0 to 100 [%]
IPv4 & IPv6/IPv4
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
230
Setting