Aligning The Deflector Plate; Fitting The Grease Filter - Miele DA 3466 Operating And Installation Instructions

Installation

Aligning the deflector plate

The position of the deflector plate can
be brought forward by up to 35 mm
using the adjusting screws on either
side of the deflector plate. This allows
the deflector plate to be aligned to the
front of the kitchen furniture units on
either side.
 Use a screwdriver to align the
deflector plate correctly.
36

Fitting the grease filter

 Remove the protective foil around the
edge of the grease filter.
 When fitting the grease filter, make
sure that the red plastic guides are at
the front and facing upwards.
 Place the grease filter in the front of
the deflector plate, press it upwards
and push it in together with the
deflector plate. It will slide onto the
retaining pins at the back. Finally,
push the grease filter back a little
more.