Download  Print this page

Connecting The Power Terminal - Pioneer GM-D505 Owner's Manual

5 channel power amplifier
Hide thumbs

Advertisement

Table of Contents
Connecting the Unit

Connecting the Power Terminal

• Always use the special red battery and ground
wires ([RD-223] × 2), which are sold separately.
Connect the battery wire directly to the car bat-
tery positive terminal (+) and the ground wire to
the car body.
1. Pass the battery wire from the
engine compartment to the interior
of the vehicle.
• After making all other connections to the
amplifier, connect the battery wire terminal
of the amplifier to the positive (+) terminal of
the battery.
Fuse (30 A)
Fuse (30 A)
Positive terminal
Insert the O-ring rubber
grommet into the vehicle
body.
2. Twist the battery wire, ground wire
and system remote control wire.
7
Engine
Interior of
compart-
the vehicle
ment
Drill a 14 mm
hole into the
vehicle body.
Twist
3. Attach lugs to wire ends. Lugs not
supplied.
• Use pliers, etc., to crimp lugs to wires.
Lug
Battery wire
4. Connect the wires to the terminal.
• Fix the wires securely with the terminal
screws.
System remote
control terminal
System remote
control wire
Ground wire
Lug
Ground wire
GND terminal
Power terminal
Battery wire

Advertisement

Table of Contents
loading

  Related Manuals for Pioneer GM-D505