Download  Print this page

Camshaft Assembly - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

3-16 ENGINE TOP END
Camshaft, Camshaft Chain
.
Tighten the camshaft cap bolts following the sequence
number.
OFor both the intake and exhaust camshafts, uniformly
tighten the bolts a little at a time.
Exhaust Side [A]
Inlet Side [8]
OAfter the camshaft has settled, tighten all the bolts in the
specified sequence.
Exhaust Side [A]
Inlet Side [8]
Torque
-
Camshaft
Cap Bolts: 12 N.m(1.2 kgf.m, 104 in.lb)
.Install
the chain guide
Torque
-
Camshaft Chain Guide Bolts:
11 N.m (1.1 kgf.m,
95 in.lb)
.
Install:
Camshaft Chain Tensioner (see Camshaft Chain Ten-
sioner Installation)
Cylinder Head Cover (see Cylinder Head Cover Instal-
lation)
Camshaft Assembly
.
Install the sprockets on the camshafts.
NOTE
Olnstall the sprockets by using the mounting holes fA]
provided for the intake camshaft, and the mounting
holes fB] provided for the exhaust camshaft, respec-
tively. There is a protrusion on the rightside of the seat
of the exhaust camshaft to which the sprocket mounts.
.
Apply non-permanent locking agent to the camshaft
sprocket bolts and tighten them.
Torque
-
Camshaft
Sprocket
Bolts:
15 N.m (1.5 kgf.m, 11
in.lb)

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: